As clear as glass. Built for commercial security.
Starking PC300 transparent polycarbonate rolling shutters combine high visibility with dependable physical protection for retail and commercial entrances. The system uses clear polycarbonate panels connected by stainless steel tubes, allowing storefront merchandise and interior displays to remain visible even when the shutter is closed.
Designed for shopping malls, retail stores, showrooms, jewelry stores, airports and other commercial premises, PC300 can be customized in door size, guide rails, shaft system, motor, controls, shutter box and safety devices to suit different project conditions.

The PC300 Transparent Polycarbonate Rolling Shutter Door is designed for commercial and retail applications where both security and visibility are required. It combines high-strength polycarbonate panels with stainless steel connecting tubes to create a clear, durable and professional storefront solution.
|
Item |
Specification |
|
Maximum Door Width |
Up to 12,000 mm |
|
Maximum Door Height |
Up to 9,000 mm |
|
Polycarbonate Thickness |
2.3 mm / 3.0 mm |
|
Transparency |
Approx. 80–90% |
|
Connecting Tube |
201 or 304 stainless steel |
|
Operation |
Manual or motorized |
|
Motor Options |
Tubular motor / side motor, subject to door size and weight |
|
Optional Safety Devices |
Photocell, safety brake, UPS, safety edge |
|
Typical Applications |
Shopping malls, retail stores, showrooms, jewelry stores, airports |
|
Customization |
Door size, motor, guide rail, shutter box and control system can be customized |
Key Advantage: High visibility without sacrificing security — ideal for commercial entrances that need to remain visually open even when the shutter is closed.

The transparent curtain allows merchandise, displays and interior spaces to remain visible after business hours, helping retailers maintain visual merchandising while the entrance is secured.
Polycarbonate is widely used where high impact resistance and transparency are required. The PC curtain provides a more impact-resistant alternative to ordinary glazing while maintaining a clear appearance.
PC300 is suitable for large commercial openings, with configurations available up to approximately 12 m wide and 9 m high, subject to engineering review of door weight, shaft, guide rail, wind load and motor selection.
Depending on door size and project requirements, the shutter can be configured for manual or motorized operation with tubular or side-mounted motors.
Guide rails, bottom rail, shaft, side plates, motor, control system, shutter box and safety devices can be selected according to site conditions and required performance.
The see-through curtain creates a modern storefront appearance that is particularly suitable for shopping malls, premium retail shops, showrooms and other customer-facing commercial spaces.

PC300 is particularly suitable for locations that require both visual openness and controlled access:
· Shopping malls and retail storefronts
· Jewelry and luxury retail stores
· Car showrooms and exhibition spaces
· Airport retail units and duty-free shops
· Banks and commercial service counters
· Commercial arcades and indoor shopfronts
· Premium restaurants or branded commercial entrances where visual display is important

|
Parameter |
Standard / Available Option |
|
Product Model |
PC300 |
|
Curtain Material |
Transparent polycarbonate panels |
|
Panel Thickness |
2.3 mm / 3.0 mm |
|
Connecting Tube |
201 / 304 stainless steel |
|
Maximum Width |
Up to approx. 12,000 mm* |
|
Maximum Height |
Up to approx. 9,000 mm* |
|
Visibility |
Approx. 80–90% |
|
Guide Rail |
Extruded aluminum guide rail; size selected according to door dimensions and project requirements |
|
Bottom Rail |
Extruded aluminum bottom rail with sealing option |
|
Shaft |
Steel shaft / barrel sized according to opening and curtain weight |
|
Operation |
Manual / motorized |
|
Motor |
Tubular motor / side motor; selected according to calculated door weight and duty requirements |
|
Control |
Wall button, remote control or project-specific control interface |
|
Optional Safety |
Photocell, safety edge, safety brake, UPS / backup power |
|
Shutter Box |
Optional exposed or project-specific enclosure solution |
|
Color / Finish |
Metal components can be finished according to project requirement where applicable |
*Maximum dimensions depend on actual project conditions, curtain weight, wind exposure, structural support, shaft design, guide rail configuration and motor selection. Large openings require technical confirmation before quotation.
A complete PC300 rolling shutter system is engineered as a combination of curtain, supporting structure, drive system and safety devices rather than as a curtain material alone.
Clear PC panels form the main visible curtain and provide the characteristic see-through appearance.
201 or 304 stainless steel tubes connect the polycarbonate panels and reinforce the curtain assembly.
Side guides keep the curtain aligned during opening and closing. Rail section should be selected according to door size, wind exposure and installation method.
Provides rigidity to the lower edge of the curtain and can incorporate a rubber seal or safety edge depending on configuration.
Supports and winds the curtain. Shaft diameter and wall thickness must be selected according to calculated curtain weight and opening width.
Support the shaft, bearings and drive components at both sides of the opening.
Motor selection depends on total door weight, opening size, operating frequency, power supply and required safety functions.
Optional enclosure protects and conceals the rolled curtain, shaft and drive system where architectural appearance requires it.

Suitable for smaller and lighter openings where operating frequency is limited. The final manual system should be selected according to calculated curtain weight and local installation conditions.
A compact drive solution suitable for selected small-to-medium configurations where installation space is limited and the calculated load is within the motor rating.
Recommended for larger or heavier shutters and projects requiring higher torque, more frequent operation or additional control functions. Motor capacity should be selected from the actual door weight rather than opening area alone.
Safety devices should be selected according to door size, application, local regulations and project specifications. Available options may include:
· Photocell sensor for obstacle detection
· Bottom safety edge to stop or reverse the shutter when an obstruction is detected
· Safety brake / anti-fall device where required by the selected system
· Emergency manual operation in case of power failure
· UPS or backup power for selected projects
· Wall-mounted push button control
· Remote control
· Interface with access control, fire alarm or building management systems where technically applicable

The correct installation arrangement should be confirmed before production because it affects guide dimensions, overall shutter size, headroom and fixing details.
The guide rails and shutter assembly are fixed to the wall face around the opening. This is often suitable where clear opening size needs to be maximized.
Guide rails are installed inside the structural opening. Accurate opening dimensions and fixing conditions are essential.
Where the architectural design requires concealed guides or a concealed shutter box, sufficient side and headroom must be confirmed during the design stage.
Starking can provide different transparent shutter configurations. The final model should be selected according to opening size, appearance, curtain construction, required strength and budget.
|
Selection Factor |
PC300 |
PC303 |
PC100 |
|
Main Positioning |
Large commercial transparent shutter |
Project-specific / premium transparent solution |
Small-to-medium or alternative curtain structure |
|
Transparency |
High |
High |
Depends on model |
|
Curtain Connection |
Stainless steel connecting tubes |
Depends on model |
Depends on model |
|
Best Use |
Shopping malls, retail, showrooms, large openings |
Projects requiring different curtain structure or appearance |
Smaller shops / budget or design-specific applications |
|
Recommendation |
Best all-round commercial PC shutter option |
Select after technical comparison |
Select according to size, budget and architecture |

For B2B buyers and project contractors, the value of a rolling shutter supplier is not limited to the curtain material. Correct sizing, component matching, technical documentation, packaging and after-sales spare parts all affect project delivery.
· Roller shutter and garage door export experience since 2011
· Custom door sizing and project-specific configuration
· Complete supply of door curtain, guide rails, shaft, motor, control and accessories
· Multiple transparent shutter configurations available
· Technical drawing and component-selection support
· Export packaging suitable for LCL and FCL shipments
· Spare parts and replacement component supply
· Support for distributors, contractors, door installers and project buyers
To recommend the correct curtain, guide rail, shaft and motor configuration, please provide the following information:
1. Opening width × height (mm)
2. Quantity
3. Project country / installation location
4. Indoor or outdoor installation
5. Installation position / available side room and headroom
6. Required operation: manual or motorized
7. Power supply (for motorized doors)
8. Required shutter box / hood
9. Required safety devices
10. Drawings, photos or project specifications if available

It is a rolling security shutter that uses transparent polycarbonate panels as the main curtain. The curtain rolls around a shaft above the opening while allowing visibility through the closed door.
The system combines impact-resistant polycarbonate panels with metal connecting components, guide rails, bottom rail and locking/drive components. Actual security performance depends on the complete configuration, installation and project requirements.
PC300 can be configured for openings up to approximately 12,000 mm wide and 9,000 mm high. Large doors require technical confirmation because shaft size, curtain weight, guide rails, structural fixing, wind exposure and motor capacity must be engineered together.
Outdoor use is possible for suitable projects, but exposure to wind, UV, rain, temperature and corrosion must be considered during specification. Provide the project location so the appropriate configuration can be reviewed.
Yes. Tubular or side-mounted motors can be selected according to door weight, size, operating frequency, available space and power supply. Kindly check more information for our
304 stainless steel generally offers better corrosion resistance and is preferred for demanding, humid or coastal environments. 201 stainless steel may be suitable for cost-sensitive indoor projects depending on project requirements.
Yes, subject to the building design and available headroom. Concealed or architectural enclosure solutions should be coordinated before production.
Please provide opening width × height, quantity, project country, installation condition, operation method, power supply and any required safety or control options. Drawings and site photos are also useful for project review.
In this case, you could choose our commercial sliding folding door.